Sveiki,gal kas pakomentuotumėt klaidas? Audi a6c6 2008


2 Faults Found
012597 - Intake Manifold Runner Control
               P3135 - 001 - Lower Stop not Reached
             Freeze Frame:
                    Fault Status: 01100001
                    Fault Priority: 0
                    Fault Frequency: 9
                    Mileage: 167582 km
                    Time Indication: 0
                    Date: 2015.08.12
                    Time: 17:53:39

             Freeze Frame:
                    RPM: 0 /min
                    Torque: 0.0 Nm
                    Speed: 0.0 km/h
                    Voltage: 12.08 V
                    Duty Cycle: 88.8 %
                    Duty Cycle: 88.8 %
                    Duty Cycle: 20.5 %

004120 - Intake Manifold Runner (Bank 2)
               P1018 - 001 - Lower limit not reached - Intermittent
             Freeze Frame:
                    Fault Status: 00100001
                    Fault Priority: 0
                    Fault Frequency: 1
                    Mileage: 167582 km
                    Time Indication: 0
                    Date: 2015.08.12
                    Time: 17:53:39

             Freeze Frame:
                    RPM: 0 /min
                    Torque: 0.0 Nm
                    Speed: 0.0 km/h
                    Voltage: 12.08 V
                    Duty Cycle: 88.8 %
                    Duty Cycle: 88.8 %
                    Duty Cycle: 20.5 %

17426/P1018/004120 - Intake Manifold Runner (BANK 2)
Possible Symptoms
Malfunction Indicator Light (MIL) ON
Possible Causes
Fuse(s) faulty
Wiring and/or Connector(s) from/to Intake Manifold Runner Motor 2 (V275) faulty
Intake Manifold Runner Motor 2 (V275) faulty
Intake Manifold Flap 2 faulty
Possible Solutions
Check Fuse(s)
Check Wiring and/or Connector(s) from/to Intake Manifold Runner Motor 2 (V275)
Check/Replace Intake Manifold Runner Motor 2 (V275)
Perform Output Test
Perform System Test using VAS 6395(A), or the latest VAS 6395(B) when applicable
Check Linkage between Intake Manifold Runner Motor 2 (V275) and Intake Manifold Flap 2 Movement, Rust and when necessary use Lubricants to repair it. If the Flap is still sluggish, also lubricate the Flap Bearings.
Check/Replace Intake Manifold Flap 2

Trumpai ir Lietuviškai: problema įsiurbimo sklendėje (BANK 2 - antroje), jos valdyme (varikliuke). Pasitikrink saugiklius, laidus arba pakeisk patį varikliuką. O geriausias variantas jas išmesti ir išsiprogramuoti.