Biski istraukiau is elsawin:
Vehicles <1998:
The airbag system contains: Driver's airbag, passenger's airbag, and 2 front belt tensioners. In a crash situation, these are actuated centrally by the airbag control unit (J234) when certain specified triggering criteria are exceeded.
Vehicles 1998>:
The airbag system contains: Driver's airbag, passenger's airbag, two front seat belt tensioners, two side airbags at the front, and 2 rear belt tensioners. In a crash situation, these are actuated centrally by the airbag control unit (J234) when certain specified triggering criteria are exceeded.
Self-diagnosis can be used to block or activate the passenger's airbag => Page 01-55.
Vehicles as of production date CW 27.99 (po 1999 metu 27 savaites)
The airbag system contains: Driver's airbag, passenger's airbag, two front seat belt tensioners, two side airbags at the front, and 2 rear belt tensioners. In a crash situation, these are actuated centrally by the airbag control unit (J234) when certain specified triggering criteria are exceeded.
In addition to using the airbag key switch it is also possible to block or activate the passenger airbag via the function "adaption" => Page 01-55.
If an airbag and/or belt tensioner is triggered, the control unit will record the fault "Crash data stored".
In such cases the control unit for the airbag (J234) must be renewed after
◆ the 1st triggering of driver's or passenger's airbag,
◆ the 3rd triggering of the front belt tensioners and/or side airbags.
After the 3rd triggering it is not possible to erase the crash signal with the fault reader V.A.G 1551 up to CW 27.99 in vehicles with airbag 8.