kazka lyg ir atkasiau:
tik klausimas, is kur reiks kodus vartos gauti
3) Code new battery with VCDS:
- Go to CAN Gateway 19, then Long Adaption, then Channel 4, Battery Identification.

- There are three strings of numbers in the following order (Part#, Battery Vendor, Serial #). For example:

8K0915105F VA0 080388159X

- I replaced the last 10 digits with the updated serial # on my new battery.

A few observations:
- Interestingly, the battery reading in the MMI was about 30% before and after I replaced the battery. It wasn't until I reset the battery serial # with the VCDS that it went up to 100%.

- My thoughts are that the battery reading in the MMI was never meant to give a reading based on current state voltage (…like a voltmeter would). But rather it is meant to give an indicator of overall battery life span given the monitoring of various readings over a long period of time.

- Resting voltage for my original battery was 12.1V. The new battery is 12.6V.





edit:


http://wiki.ross-tech.com/wiki/index.php/Battery_Replacement


panasu kad su varta