Labas, Svečias. Prašome prisijungti arba užsiregistruoti. Did you miss your activation email?




Autorius Tema: A8 Važiuoklės skyrius  (Skaityta 291585 kartus)

Neprisijungęs Gedis

  • Banned!
  • Įrašai: 13709
    • Žiūrėti profilį
  • Miestas: Klaipėda
A8 stabdžių diskai
« Topic Start: 2007 Lapkričio 30, 09:48:23 »
by 'rafinuotas' request

Brake test
All Wheel Drive (AWD) vehicles (Torsen differential)

Brake test on a 1-axle test stand for All Wheel Drive (AWD) vehicles
The wheels on one axle are driven in opposite directions by the test stand so that the other axle is not driven.
We recommend using a brake test stand with RPM regulation for the rollers and a maximum test speed of 6 Km/h.
Brakes may engage if these specifications are not met (EDL regulation).
If this occurs, switch engine and ignition off for test. To obtain sufficient vacuum for the brake test, let engine run briefly.
If there is no All Wheel Drive (AWD) test stand available, the test can also be performed on a conventional test stand as long as the requirements listed above are met.


Brake test
Front Wheel Drive (FWD) vehicles
Brake test on a 1-axle dynamometer
We recommend a brake test stand with RPM regulation for the rollers and a maximum test speed of 6 Km/h.
Brakes may engage if these specifications are not met (EDL regulation).
If this occurs, switch engine and ignition off for test. To obtain sufficient vacuum for the brake test, let engine run briefly.

 

Related Topics

  Antraštė / Pradėjo Atsakymai Paskutinis įrašas
B5 Važiuoklės skyrius

Pradėjo orzo « 1 2 ... 37 38 » B5

947 Atsakymai
132054 Peržiūrėta
Paskutinis įrašas 2018 Balandžio 14, 17:44:46
sukūrė ~Romas~
B6 Važiuoklės skyrius

Pradėjo orzo « 1 2 ... 12 13 » B6

301 Atsakymai
57882 Peržiūrėta
Paskutinis įrašas 2019 Gruodžio 08, 10:14:45
sukūrė Gintas496
86 Atsakymai
93951 Peržiūrėta
Paskutinis įrašas 2017 Gruodžio 16, 10:35:46
sukūrė slashas